Tracker 4WD L4-2.0L VIN C (1999)
17. Lightly grease the solenoid plunger (3) with Lubriplate lubricant GM P/N 1050109, or the equivalent.
18. Install the solenoid plunger and spring.
19. Install the solenoid to the drive housing, aligning the matchmarks (2).
NOTE: Refer to Fastener Notice in Service Precautions.
20. Install the 2 solenoid screws.
Tighten
Tighten the solenoid (1) mounting screws to 7 N.m (62 lb in).
