Tracker 4WD L4-2.0L VIN C (1999)
12. START the engine. Allow the engine to idle.
13. Partially raise and support the vehicle in order to allow the front tires and wheels to turn freely.
14. Ensure the front tires and wheels are in the straight ahead position.
IMPORTANT: Do not turn the steering wheel to lock.
15. Turn the steering wheel 360 degrees in both directions 5 times.
16. Turn the ignition switch OFF.
17. Remove the reservoir cap (1).
18. Inspect the fluid level. Add fluid, if necessary.
19. Attach the J 43485 to the J 35555.
20. Place the J 43485 on the reservoir filler neck.
21. Apply a vacuum of 20 in Hg maximum.
22. Wait 5 minutes.
23. Remove the J 43485 and the J 35555.
24. Inspect the fluid level. Add fluid, if necessary.
25. Install the reservoir cap (1).
26. Lower the vehicle.