Tracker 4WD L4-2.0L VIN C (1999)
11. Place a drain pan or a suitable container under the steering gear.
NOTICE: Refer to Power Steering Hose Disconnected Notice in Service Precautions.
12. Remove the power steering gear inlet pipe/hose bolt (5) and the 2 gaskets from the power steering gear inlet pipe/hose (6).
13. Remove the power steering gear inlet pipe/hose (6) from the steering gear.
14. Loosen the hose clamp and remove the power steering fluid reservoir hose (3) from the steering gear.
15. Plug the power steering hoses in order to keep the fluid from escaping.
16. Remove the intermediate steering shaft clamp bolt (2).
17. Disconnect the lower steering shaft (1) from the steering gear.
18. Using paint, place match marks (2,4) on the pinion shaft (3) and steering gear housing (1).
IMPORTANT: Do NOT disassemble the power steering gear.
19. Remove the 4 steering gear mounting bolts (1).
