Tracker 4WD L4-2.0L VIN C (1999)
2. Install the stabilizer shaft insulator bracket (6) to the stabilizer shaft (5). Secure with 2 bolts (7). Do not tighten the bolts.
NOTICE: Refer to Fastener Notice in Service Precautions.
IMPORTANT: Ensure the vehicle's weight is on the tires and wheels. Ensure that the stabilizer shaft (5) is centered, side-to-side, and the
insulators are aligned with the match marks on the stabilizer shaft.
3. Verify that the stabilizer shaft links (9) are set at a neutral position, as seen from above.
-
Tighten the stabilizer shaft insulator bracket bolts (7) to 23 Nm (17 ft. lbs.).
