Tracker 4WD L4-2.0L VIN C (1999)
Shifter A/T: Service and Repair
Removal Procedure
Caution: Refer to Battery Disconnect Caution in Service Precautions
1. Disconnect the negative battery cable (1)
2. Put the manual selector in the NEUTRAL position.
3. Remove the 4 screws (1,6,3,4) and the 2 plastic retaining clips (2,5) from the console.
4. Remove the console.
5. Remove the shift lock solenoid connector (3) from under the carpet.
6. Remove the shift indicator lamp (1).
7. Remove the 4 bolts from the manual selector from the floor.