chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

All Technical Service Bulletins for Throttle Valve Cable/Linkage: > < A/T - 4L60/65E, No Reverse/2nd or 4th Gear|Page 5286
Page 1
background image

Throttle Valve Cable/Linkage: Customer Interest
Acclerator Pedal - High Effort

File In Section: 07 - Transmission/Transaxle 

Bulletin No.: 00-07-30-023

Date: November, 2000

Subject: 
High Accelerator Pedal Effort 
(Replace Throttle Valve Control (TV) Cable)

Models: 
1999-2000 Chevrolet Tracker
with Automatic Transmission (RPO M41)

Condition
Some customers may comment on a higher than normal accelerator pedal effort.

Cause
This condition may be caused by the throttle valve control (TV) cable corroding within the casing resulting in binding of the cable.

Correction
A new TV cable, P/N 91175992, is available with a stainless steel material to prevent the corrosion.

Important

Be sure to install the stopper provided with the cable assembly to the inner cable. This stopper is the adjustment reference point.

Replace the cable following the service procedure in the Automatic Transmission sub-section of the Service Manual.

Parts Information
Parts are currently available from GMSPO.

Warranty Information

For vehicles repaired under warranty, use the table.

Disclaimer

All Technical Service Bulletins for Throttle Valve Cable/Linkage: > < A/T - 4L60/65E, No Reverse/2nd or 4th Gear|Page 5286