Tracker 4WD L4-2.0L VIN C (1999)
into the differential carrier.
10. Install a pinion selective shim (2) onto the pinion gear shaft
11. Install the pinion bearing (1) onto the pinion gear shaft. Use the J 6133-01.
12. Place the pinion gear (3) on a hydraulic press.
13. Install the inner pinion bearing on the pinion gear shift shaft with the tapered side facing away from the pinion gear.
14. Place the J 6133-01 on the pinion gear shaft and slowly press the inner bearing into place.
15. Install a new collapsible spacer (4) onto the pinion gear shaft with the short shank toward the pinion gear.
16. Install the outer pinion bearing (3) and the pinion gear (5) into the differential carrier (2).
17. Install a new pinion oil seal into the differential carrier using the J25273.
18. Apply wheel bearing lubricant GM P/N 1051344, or equivalent, to the new pinion oil seal lip.
