Tracker 4WD L4-2.0L VIN C (1999)
9. Remove the rear axle shaft (1) and the bearing from the rear axle housing using the J 34866 with the J2619-01.
Important: The right and left rear axle shafts are different lengths.
10. Measure the left rear axle shaft length from the differential end of the shaft to the outside edge of the axle shaft flange.
Specification
The left rear axle shaft length is 711.5 mm (28.0 inch).
11. Measure the right rear axle shaft length from the differential end of the shaft to the outside edge of the axle shaft flange.
Specification
The right rear axle shaft length is 757 mm (29.8 inch).
