Tracker 4WD L4-2.0L VIN C (1999)
10. Install the outer bearings to the hub.
11. Use the J 37781 and the J 2619-01 in order to install the hub (1) with the bearings and the seals to the spindle.
12. Install the bearing washer (3).
NOTICE: Refer to Fastener Notice in Service Precautions.
13. Use the J 37763 in order to install the wheel bearing lock nut (2).
^
Tighten the wheel bearing lock nut to 216 Nm (159 ft. lbs.).
