Tracker 4WD L4-2.0L VIN C (1999)
6.
Disconnect the right side front wheel speed sensor electrical connector.
7.
Remove the right side front wheel speed sensor retaining bolt (2) and sensor (3) from the steering knuckle.
8.
Remove the right outer tie rod lock nut.
9.
Separate the right outer tie rod from the steering knuckle using the J 24319-B.
10.
Remove the 6 bolts (2) and the flange (1).
11.
Remove the drive axle shaft snap ring (2).
12.
Remove the drive axle shaft spindle washer (1) from the drive axle shaft.
13.
Remove the caliper bolts and caliper from mounting bracket and set aside.