Tracker 4WD L4-2.0L VIN C (1999)
DISCLAIMER
Front Differential Case, Actuator
Tools Required
^
J 24319-B Universal Steering Linkage Puller
^
J 37780 Axle Shaft Remover
^
J 3289-21 Holding Fixture
^
J 37769 Differential Holding Fixture Adapters
^
J 3289-20 Holding Fixture Base
^
J 22888-D Side Bearing Remover
^
J 8107-4 Differential Side Bearing Remover Plug
^
J 37758 Pinion Outer Race Installer
^
J 8092 Driver Handle
^
J 24433 Side Bearing Installer
1.
Raise and suitably support the vehicle. Refer to the General Information sub-section in the Service Manual.
2.
Remove the 4 bolts and the front skid plate from the vehicle, if equipped.
3.
Place a drain pan or suitable container under the front axle assembly.
4.
Remove the front axle housing drain plug (2) and drain the front axle oil.
5.
Remove the right front wheel.
