Tracker 4WD L4-2.0L VIN C (1999)
Wiper Motor: Service and Repair
Wiper Motor Replacement - Front
REMOVAL PROCEDURE
1. Disconnect the windshield wiper motor electrical connector (3).
2. Remove the 4 mounting bolts (1) which secure the windshield wiper motor.
3. Pull the windshield wiper motor (2) away from the bulkhead.
IMPORTANT: Do not service the windshield wiper motor crank arm (2) separately. Do not disconnect the windshield wiper motor crank arm
(2) from the windshield wiper motor (3). The crank arm (2) is positioned on the wiper motor (3) in order to allow the windshield wiper arms to
return to their normal park position.
4. Gently pry the windshield wiper motor linkage (1) from the windshield wiper motor crank arm (2).
5. Remove the windshield wiper motor (3) from the vehicle.
INSTALLATION PROCEDURE
