Tracker 4WD V6-2.5L VIN 4 (2001)
Rear Door Striker: Service and Repair
Door Striker Replacement - Rear Door
REMOVAL PROCEDURE
1. Mark the position of the rear side door lock striker (2) on the door jamb for ease of installation.
2. Remove 2 screws and the rear side door lock striker (2) from the door jamb.
INSTALLATION PROCEDURE
1. install the rear side door lock striker (2) to the door jamb. Secure the striker with the 2 screws.
2. Adjust the rear side door lock striker vertical measurement so that the striker (2) shaft aligns with the center of the rear side door lock (1).