Tracker 4WD V6-2.5L VIN 4 (2001)
Rear Door Window Regulator: Service and Repair
Rear Door Window Regulator - Manual
Rear Side Door Window Regulator Replacement (Without Power Windows)
Removal Procedure
1. Remove the rear side door window. Refer to Rear Side Door Window Replacement (See: Rear Door Window Glass/Service and Repair) .
2. Remove the 3 bolts (1) and the 3 nuts (2) which secure the front side door window regulator (5).
3. Remove the window regulator (5) through the large opening in the inner portion of the rear side door.
Installation Procedure
1. Apply a multipurpose grease to the specified points.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the rear side door window regulator (5) through the large opening in the inner portion of the rear side door. Secure the regulator to the door
with the 3 bolts (1) and the 3 nuts (2).
Tighten the rear side door window regulator bolts and nuts to 10 N.m (89 lb in).
3. Install the rear side door window. Refer to Rear Side Door Window Replacement (See: Rear Door Window Glass/Service and Repair) .