Tracker 4WD V6-2.5L VIN 4 (2001)
4. Install the park brake cable spring (1) and the nipple end (2) to the park brake shoe lever (3).
5. Install the lower return spring (4).
6. Install the following components:
^
The upper return spring (1)
^
The strut
^
The adjuster (2)
^
The adjuster lever
^
The adjuster spring (5)
^
The strut spring (3)
^
The pawl lever (6)
7. Install the shoe hold down springs (2). Turn the shoe hold down pins (1) in order to retain the shoe hold down springs.
8. Install the left brake drum. Refer to Brake Drum Replacement.
9. Install the left rear tire and wheel assembly.
10. Lower the vehicle.