Tracker 4WD V6-2.5L VIN 4 (2001)
Cruise Control Servo: Description and Operation
The cruise control servo assembly is mounted to the left inner wheelhouse panel in the engine compartment. The cruise control servo assembly consists
of the following components:
^
The DC servo
^
The worm gear
^
The magnetic clutch
^
The cruise control module
The cruise control servo actuates the accelerator cable in order 10 increase and decrease the throttle angle in response to signals from the following
locations:
^
The main cruise control switch (CRUISE CTRL) (6)
^
The cruise control mode switch (RESUME/ACCEL, COAST/SET, and CANCEL) (1)
^
The Vehicle Speed Sensor (VSS) (speedometer)
The input signals received by the cruise control servo assembly are broken down into the following categories:
^
The ON/OFF input
^
The speed control input
^
The throttle position
^
The cancel input
The main cruise control switch (CRUISE CTRL) (6) provides the ON/OFF signal to the cruise control servo assembly in order to activate and deactivate
the cruise control system.
