Tracker 4WD V6-2.5L VIN 4 (2001)
INSTALLATION PROCEDURE
NOTE: Refer to Fastener Notice in Service Precautions.
1. Install the cruise control servo assembly (6) to the vehicle. Secure the assembly with the 3 bolts (2).
Tighten
Tighten the cruise control servo assembly mounting bolts to 10 N.m (89 lb ft).
2. Connect the cruise control servo assembly electrical connector.
3. Install the cruise control servo cable (3) to the cruise control actuator lever (1).
4. Adjust the cruise control servo cable locknuts (5) in order to adjust the cruise control servo cable play.
5. Adjust the cruise control servo cable play to 1-2 mm (0.04-0.08 in) at the servo closed throttle position.
Tighten
Tighten the cruise control cable locknut (5) to 5 N.m (44 lb in).
