Tracker 4WD V6-2.5L VIN 4 (2001)
6. Install the Idle Air Control (IAC) valve with a new gasket.
7. Connect the following hoses:
-
The heater hose (2)
-
The EVAP canister hose (1)
-
The fuel feed hose (4)
-
The fuel return hose (3)
-
The tank pressure control solenoid valve hose
8. Install the Exhaust Gas Recirculation (EGR) pipe (4)
9. Connect the following hoses:
-
The PCV hose to the cylinder head cover (9)
-
The breather hose to the throttle body (6)
-
The EVAP canister purge valve hose (1).
-
The water hose (8)
-
The heater hoses (3,5)
10. Connect the following electrical connectors:
-
The Manifold Differential Pressure (MDP) sensor
-
The EVAP canister purge valve (1)
-
The Exhaust Gas Recirculation (EGR) valve (2)