Tracker 4WD V6-2.5L VIN 4 (2001)
11. Remove the right primary timing chain camshaft sprocket bolt while holding the right intake camshaft (2) with a wrench.
12. Remove the right primary sprocket (1) from the intake camshaft.
13. Remove the primary timing chain crankshaft sprocket.
14. Inspect the following components for wear and damage:
-
The primary timing chain guides
-
The primary timing chain tensioner
-
The primary timing chain sprockets
-
The primary timing chain
15. Verify that the latch (1) and teeth (2) of the timing chain tensioner adjuster are undamaged and that the tensioner functions correctly.
16. Replace any worn or damaged component.
Installation Procedure
1. Verify that the keyway (2) on the crankshaft is positioned properly.
