Tracker 4WD V6-2.5L VIN 4 (2001)
1. Install the resonator/muffler/tail pipe assembly to the vehicle.
2. Support the resonator/muffler/tail pipe assembly with hangers.
3. Attach the resonator/muffler/tail pipe assembly (7) with a new gasket to the catalytic converter assembly (5).
4. Secure the resonator/muffler/tail pipe assembly with two nuts. Do not fully tighten the nuts.
Notice: Refer to Fastener Notice in Service Precautions.
5. Align all system components before tightening the fasteners, in order to prevent noise or vibrations.
Tighten the catalytic converter to resonator/muffler/tail pipe assembly bolts to 50 Nm (37 ft. lbs.).
6. Lower the vehicle.