Tracker 4WD V6-2.5L VIN 4 (2001)
Condenser HVAC: Service and Repair
CONDENSER REPLACEMENT
REMOVAL PROCEDURE
1. Remove the front grille.
IMPORTANT: When installing a new condenser add 20-30 ml (0.7-1.0 fl oz) of refrigerant oil to the refrigeration system.
2. Discharge and recover the refrigerant. Refer to Refrigerant Recovery and Recharging.
3. Disconnect the condenser fan electrical connector (2).
4. Disconnect the refrigerant pressure sensor electrical connector (1).
5. Remove the 4 nuts (3) from the condenser fan and position the condenser fan aside.
IMPORTANT: Cap the refrigerant openings in order to prevent moisture and dirt from entering the system.
