Tracker 4WD V6-2.5L VIN 4 (2001)
Hose/Line HVAC: Service and Repair
Evaporator Tube Replacement - Inlet
REMOVAL PROCEDURE
1. Discharge and recover the refrigerant. Refer to Refrigerant Recovery and Recharging.
2. Remove the front grille.
3. Remove the air cleaner hose.
4. Slide the EVAP canister out of its bracket and position aside.
5. Remove the bolt (1) from the expansion valve.
6. Slide the plate (2) counterclockwise and remove the evaporator inlet tube from the expansion valve.
7. Disconnect the condenser outlet-to-evaporator inlet fitting (6).
8. Remove the evaporator inlet tube from the body mounted retainers.
9. Remove the evaporator inlet tube from the vehicle.
INSTALLATION PROCEDURE