Tracker 4WD V6-2.5L VIN 4 (2001)
Parking Light Bulb: Service and Repair
PARK/TURN SIGNAL LAMP BULB REPLACEMENT
REMOVAL PROCEDURE
1. Raise and suitably support the hood.
2. Twist the park/turn lamp bulb socket counterclockwise and remove the socket from the headlamp assembly.
3. Remove the bulb from the socket.
INSTALLATION PROCEDURE
1. Install the bulb to the socket.
2. Install the park/turn lamp bulb socket to the headlamp assembly and twist clockwise in order to secure the socket.
3. Lower the hood.