Tracker 4WD V6-2.5L VIN 4 (2001)
11. Disconnect the accelerator control cable from the throttle body. Rotate the throttle lever (1) to Wide Open Throttle (WOT) and remove the cable
end from the slot (2).
12. Remove the two fasteners and the accelerator cable bracket from the throttle body.
13. Extend the transmission throttle valve cable and disconnect the cable end from the throttle lever.
14. Remove the two bolts and the four nuts attaching the intake collector (1) to the intake manifold.
15. Remove the two bolts and the two nuts attaching the throttle body (3) to the intake collector (1).
16. Remove the breather hose (2) from the throttle body (3).
17. Move the throttle body towards the front, while sliding the intake collector towards the rear, in order to remove the throttle body from the vehicle.
INSTALLATION PROCEDURE
