Tracker 4WD V6-2.5L VIN 4 (2001)
1. Install ignition coil (2) into the valve cover.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Secure the ignition coil to the engine with the retaining bolt (1).
Tighten
Tighten the retaining bolt to 3 N.m (26 lb in).
3. Connect the ignition coil electrical connector.
4. Install the ignition coil cover (2) to the valve cover (1).
5. Secure the ignition coil cover (2) with the two fasteners.