Tracker 4WD V6-2.5L VIN 4 (2001)
IMPORTANT: The inflator module will deploy when the wire ends contact the power source.
35. Separate one set of wires and touch the wire ends to the power source in order to deploy the inflator modules.
36. Disconnect the deployment harness from the power source and twist the wire ends together.
37. Continue the same process with the remaining deployment harnesses that are available.
38. Remove the drop cloth from the vehicle.
39. Disconnect all harnesses from the vehicle.
40. Discard the harnesses.
41. Scrap the vehicle in the same manner as a non-SIR equipped vehicle.
42. If one or more of the inflator modules did not deploy, perform the following steps to remove the undeployed module(s) from the vehicle:
^
If the steering wheel module did not deploy or,
^
If the IP module did not deploy,
43. Call the Technical Assistance Group for further assistance.