Tracker 4WD V6-2.5L VIN 4 (2001)
1. Install the tail/stop lamp bulb to the bulb socket (5), if removed.
2. Install the tail/stop lamp bulb socket (5) to the tail lamp and twist clockwise in order to secure the socket.
3. Install the backup lamp bulb to the bulb socket (3), if removed.
4. Install the backup lamp bulb socket (3) to the tail lamp and twist clockwise in order to secure the socket.
5. Install the turn signal lamp bulb to the bulb socket (2), if removed.
6. Install the turn signal lamp bulb socket (2) to the tail lamp and twist clockwise in order to secure the socket.
7. Connect the tail lamp electrical connector (4).
8. Install the tail lamp (1) to the vehicle. Secure the tail lamp with the 2 screws (2).