Tracker 4WD V6-2.5L VIN 4 (2001)
6. Install the battery positive wires to the fuse box noting the correct terminal routing.
7. Install the fuse box (1) to the right inner fender. Secure with the 3 bolts.
8. Install the ground wire to the bulkhead.
9. Connect the harness (1) retainers.
10. Install the positive battery cable to the positive battery terminal.
NOTE: Refer to Fastener Notice in Service Precautions.
11. Install the negative battery cable to the negative battery terminal.
Tighten
Tighten the battery cable-to-battery terminals to 15 N.m (11 lb ft).