Tracker 4WD V6-2.5L VIN 4 (2001)
7. Measure the resistance between the rectifier upper body (2) and each diode lead (1) using J 39200. Reverse the probes and measure the resistance
again. The resistance should be less than 5 ohms in one measurement and greater than 5 ohms in the other measurement. If not, replace the
rectifier.
8. Measure the resistance between the rectifier lower body (2) and each diode lead (1) using the J 39200. Reverse the probes and measure the
resistance again. The resistance should be less than 5 ohms in one measurement and greater than 5 ohms in the other measurement. If not, replace
the rectifier.