Tracker 4WD V6-2.5L VIN 4 (2001)
21. Inspect the starter solenoid plunger operation by first pressing in the plunger and then releasing the plunger. If the plunger does not return to its
original position quickly, replace the starter solenoid (1).
22. Inspect the internal gear assembly (1) and idle gears (2,3) for wear, damage or other abnormal conditions. Replace as necessary.
General Information
TOOLS REQUIRED
^
J 544-01 Tension Scale
^
J 8001 Dial Indicator
^
J 26900-13 Magnetic Base
^
J 26900-5 Vernier Caliper
^
J 39200 Digital Multimeter
Starter Motor No-Load Test
CAUTION: Keep fingers and tools away from the opening in the starter drive housing while performing the Starter No Load Test. The strong
shifting action of the solenoid could cause personal injury or damage as the drive pinion moves into the cranking position and spins.