Tracker 4WD V6-2.5L VIN 4 (2001)
3. Apply grease to the clevis pin. Using lubricant GM P/N 1051344, or equivalent.
4. Install the clevis pin (5).
5. Install the retainer (4).
6. Install the clutch fluid pipe.
7. Install the clutch fluid pipe flare nut (1).
^
Tighten the clutch fluid pipe flare nut to 13 Nm (10 ft. lbs.).
8. Fill the master cylinder with brake fluid and check for brake fluid leakage.
9. Bleed the air from the system and check for the clutch pedal free travel.
10. Connect the negative battery cable.
