Tracker 4WD V6-2.5L VIN 4 (2001)
![background image](/chevrolet/tracker_4wd/v6-2.5l_vin_4/Page-1350007.png)
10. Remove the snap ring on the spline (1).
11. Remove the right side drive axle shaft.
Installation Procedure
1. Install the drive axle shaft to the differential housing.
2. Install the snap ring to the spline.
3. Install the drive axle shaft spindle washer (1) onto the drive axle shaft.
4. Install the drive axle shaft snap ring (2) onto the end of the drive axle.