Tracker 4WD V6-2.5L VIN 4 (2001)
16. Install the drain plug (2) into the rear axle housing.
^
Tighten the rear plug to 25 Nm (18 ft. lbs.).
17. Refill the rear axle housing with approximately 2.2 liters (4.6 pts.) of 8OW-90 GI-5 lubricant, GM P/N 12345977, or equivalent. The oil level
should be even with the bottom of the filler plug hole.
18. Install the rear axle housing oil level/filler plug (1) into the rear axle housing.
^
Tighten the plug to 43 Nm (32 ft. lbs.).
19. Remove the drain pan from under the rear axle housing.
20. Lower the vehicle.