Tracker 4WD V6-2.5L VIN 4 (2001)
Fluid - M/T: Service and Repair
Transmission Oil Change Procedure
1. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
2. Place a drain pan or suitable container underneath transmission.
3. Remove transmission oil level/filler plug from transmission (2 Wheel Drive Models) (2),
4. Remove the transmission oil level/filler plug from the transmission 4 Wheel Drive Models (3).
5. Remove transmission drain Plug from transmission and drain transmission oil (2 Wheel Drive Models) (3).
6. Apply GM P/N 12346004, or equivalent, to the threaded portion of the transmission drain plug (3).
Notice: Refer to Fastener Notice in Service Precautions.
7. Install transmission drain plug (3) into the transmission (2 Wheel Drive Models).
^
Tighten the transmission drain plug to 28 Nm (20 ft. lbs.).
8. Pour approximately 1.5 liters (1.6 qts.) of GM Goodwrench Synthetic Manual Transmission Fluid, (GM P/N 12346190) or equivalent SAE
75W-90 GL-4 Gear Oil into the transmission oil level/filler plug (2) hole. Oil level should be even with the bottom of the transmission oil