Tracker 4WD V6-2.5L VIN 4 (2001)
Transmission Mount: Service and Repair
Rear Transmission Mount
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Support the transmission with a suitable hydraulic jack.
3. Disconnect the VSS.
4. Remove the 2 bolts (2) from the rear transmission mount (1).
5. Remove the 4 bolts and the rear transmission crossmember from the vehicle.
6. Remove 1 bolt and the rear transmission mount (2) from the extension case (1).
Installation Procedure
Notice: Refer to Fastener Notice in Service Precautions.