Tracker 4WD V6-2.5L VIN 4 (2001)
Wiper Motor: Service and Repair
Wiper Motor Replacement
REMOVAL PROCEDURE
1. Disconnect the windshield wiper motor electrical connector (3).
2. Remove the 4 mounting bolts (1) which secure the windshield wiper motor.
3. Pull the windshield wiper motor (2) away from the bulkhead.
IMPORTANT: Do not service the windshield wiper motor crank arm (2) separately. Do not disconnect the windshield wiper motor crank arm (2)
from the windshield wiper motor (3). The crank arm (2) is positioned on the wiper motor (3) in order to allow the windshield wiper arms to return to
their normal park position.
4. Gently pry the windshield wiper motor linkage (1) from the windshield wiper motor crank arm (2).
5. Remove the windshield wiper motor (3) from the vehicle.
INSTALLATION PROCEDURE