Tracker 4WD V6-2.5L VIN 4 (2001)
Wiper Switch: Service and Repair
Wiper/Washer Switch Replacement - Rear
REMOVAL PROCEDURE
1. Remove the following components from the instrument panel:
1.1. The 3 screws (2)
1.2. The IP steering column opening trim plate (1)
2. Release the upper and lower retaining tabs behind the instrument panel which secure the rear window wiper/washer switch (2).
3. Slide the rear window wiper/washer switch (2) from the instrument panel in order to disconnect the electrical connector.
4. Disconnect the rear window wiper/washer switch electrical connector.
5. Remove the rear window wiper/washer switch (2) from the vehicle.
INSTALLATION PROCEDURE