TrailBlazer 2WD L6-4.2L VIN S (2003)
Antenna Cable: Service and Repair
Antenna Extension Cable Replacement
ANTENNA EXTENSION CABLE REPLACEMENT
REMOVAL PROCEDURE
1. Remove the inflatable restraint instrument panel (IP) module.
2. Disconnect the antenna cable (2) from the radio extension cable.
3. Remove the cable attachments (1) from the IP support bars.
IMPORTANT: Note the location of the radio extension cable before removal.
4. Reach through the IP compartment to disconnect the antenna cable from the radio.
5. Remove the radio extension cable from the vehicle.
INSTALLATION PROCEDURE