TrailBlazer 2WD L6-4.2L VIN S (2003)
1. Starting at the top of the garnish molding, carefully release the upper attaching clip that retains the garnish molding to the first pillar.
2. Release the remaining 2 retaining clips from the first pillar.
3. Remove the garnish molding (1) from the vehicle.
INSTALLATION PROCEDURE
1. Position the garnish molding (1) to the vehicle.
2. Align the locating fingers to the corresponding holes in first pillar.
3. Starting at the top of the garnish molding, seat the attachment clips that retain the garnish molding to the first pillar.
