TrailBlazer 2WD L6-4.2L VIN S (2003)
1. Install the rubber bumper (1) to the latch.
2. Rotate the actuator toward the latch in order to fully engage the rubber bumper into the latch.
3. Install the actuator to the top of the latch.
IMPORTANT: Ensure that the first tooth of the gear on the actuator and the first tooth of the gear on the latch align and interlock properly.
4. Install the 2 screws that retain the actuator (1) to the lock.
NOTE: Refer to Fastener Notice in Service Precautions.
