TrailBlazer 2WD L6-4.2L VIN S (2003)
3. Remove the retaining clip from each head restraint post.
4. Remove the head restraint from the seat back.
INSTALLATION PROCEDURE
1. Install the retaining clips to the head restraint retractor.
2. Verify that the retaining clips are fully seated.
3. Install the rear seat head restraint posts to the head restraint retractor, verifying that the notches in the head restraint posts are indexed toward the
back of the seat.
4. Lower the head restraint to the full down position.
Head Restraint Guide Replacement - Rear No. 1
HEAD RESTRAINT GUIDE REPLACEMENT - REAR NO. 1
REMOVAL PROCEDURE
1. Remove the head restraint.
2. Remove the seat back cover and pad high enough to expose the head restraint guides.