TrailBlazer 2WD L6-4.2L VIN S (2003)
3. Install the cover flaps to the pad with hog rings (1).
4. Install the seat cushion panel on the pad and cover.
5. Install the J-strips (2) securing the seat cushion cover to the seat cushion panel.
6. Install the pull handle assembly (1).
7. Install the rear seat cushion assembly (1) to the seat latch rod (3) with two bolts (2).
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the seat cushion bolts to 11 N.m (97 lb in).