TrailBlazer 2WD L6-4.2L VIN S (2003)
4. Inspect the oil pan alignment. Use a straight edge on the back of the block and the oil pan transmission mounting surface.
NOTICE:
Refer to Fastener Notice in Service Precautions.
See: Service Precautions/Vehicle Damage Warnings/Fastener Notice
5. Install the oil pan bolts.
-
Tighten the oil pan side bolts to 25 Nm (18 ft. lbs.).
-
Tighten the oil pan end bolts to 10 Nm (89 inch lbs.).
6. Install the 4 transmission bell housing bolts that attach to the oil pan.
Tighten bolts to 47 Nm (35 ft. lbs.).
7. Install the A/C compressor 2 bottom bolts (4).
Tighten all 4 bolts to 50 Nm (37 ft. lbs.).
8. Install the front differential bolts.
Tighten the front differential bolts to 85 Nm (63 ft. lbs.).
9. Install the front drive axle, clutch fork assembly.
