TrailBlazer 2WD L6-4.2L VIN S (2003)
Seat Belt Retractor: Service and Repair
No. 2 Left Rear
REMOVAL PROCEDURE
1. Remove the rear seat belt upper guide shoulder bolt.
2. Remove the left rear quarter trim panel.
3. Remove the rear seat belt lower anchor nut.
4. Remove the bolt that retains the seat belt retractor assembly to the body.
5. Remove the seat belt retractor assembly from the vehicle.
INSTALLATION PROCEDURE
1. Install the seat belt retractor assembly to the vehicle.
2. Install the seat belt retractor assembly to the vehicle
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the rear seat belt retractor bolts to 70 N.m (52 lb ft).
3. Install the left rear quarter trim panel.
4. Install the rear seat belt lower anchor nut. Ensure that the seat belt webbing is not twisted.
Tighten
Tighten the rear seat mounting nut to 45 N.m (33 lb ft).
5. Install the rear seat belt upper guide with the bolt. Ensure that the seat belt webbing is not twisted.