TrailBlazer 2WD L6-4.2L VIN S (2003)
Suspension Strut / Shock Absorber: Service and Repair
Rear Shock Absorber
Shock Absorber Replacement
Shock Absorber Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
Notice: The rear axle must not be allowed to hang freely while servicing rear suspension components. Not supporting the rear axle will result in
damage to the upper control arm and/or to the air suspension components.
2. Support the rear axle.
3. Remove the shock absorber upper mounting bolt.
4. Remove the shock absorber lower mounting bolt.
5. Remove the shock absorber from the vehicle.
Installation Procedure
