TrailBlazer 2WD L6-4.2L VIN S (2003)
21. Once the specified torque is obtained, rotate the pinion several times to ensure the bearings have seated.
Recheck the rotating torque and adjust if necessary.
22. Install the differential.
23. Perform a gear tooth contact pattern check on the pinion and the ring gear.
24. Install the axle shafts.
25. Install the brake rotors.
26. Install the brake calipers.
27. Install the tire and wheel assemblies.
28. Fill the axle with axle lubricant. Use the proper fluid.
29. Lower the vehicle.