TrailBlazer 2WD L6-4.2L VIN S (2003)
5. Remove the window bracket (3) to the window frame pin (1) prior to operating the body side window.
Caution: Insufficient curing of urethane adhesive may allow unrestrained occupants to be ejected from the vehicle resulting in personal
injury.
*
For the moisture-curing type of urethane adhesive, allow a minimum of 6 hours at 21°C (70°F) or greater and with at least 30 percent
relative humidity. Allow at least 24 hours for the complete curing of the urethane adhesive.
*
For the chemical-curing type of urethane adhesive, allow a minimum of 1 hour.
Do NOT physically disturb the repair area until after these minimum times have elapsed.
Important: The actuator screw must be tightened and the window frame pin must be removed for the window to function properly.