TrailBlazer 2WD V8-5.3L (2007)
2. Partially install the front bracket retaining bolts.
3. Carefully pull down on the rearward edge of the headliner in order to expose the rear bolt installation area.
4. Partially install the rear bracket retaining bolt.
Notice: Refer to Fastener Notice.
5. Fully seat the retaining bolts.
Tighten the bolts to 10 N.m (88 lb in).
6. Install the two rear overhead console carrier screws (1).
Tighten the screws to 1.2 N.m (10 lb in).
7. Install the video display assembly.
8. Verify the video display for proper operation.
9. Close the video display screen.
10. Install the bolt cover bezel.
