TrailBlazer 2WD V8-5.3L (2007)
5. Pull the seat back cover down approximately 18 cm (7 in) from the top of the seat back, leaving the reinforcement bar exposed.
6. Install the hog rings that retain the seat back pad to the reinforcement bar.
7. Pull the seat cover over the seat back pad.
8. Press the seat cover hook and loop retaining strips together by firmly running your hand over the seat back cover.
Notice: Refer to Fastener Notice.
9. Install the seat belt bezel to the top of the seat back with the mounting screw.
Tighten the seat belt bezel screw to 3 N.m (26 lb in).
10. Using a flat-bladed tool, carefully engage the plastic strips that retain the seat back cover to the side air bag inflator module.
11. Carefully install the seat back cover behind the trim edge of the side air bag inflator module.
12. Fasten the J-strips (1, 4) across the bottom of the seat back cover.
13. Install the seat cover flaps (2) to the seat frame with push-pins (3).
14. Install the seat trim panel.
15. Install the head restraint.
16. Install the front seat assembly from the vehicle.
Front Seat Back Frame Replacement
Front Seat Back Frame Replacement
Removal Procedure