TrailBlazer 2WD V8-5.3L (2007)
4. Remove the bolts (2) that retain the latch bracket to the hinge bracket.
5. Remove the bolts (1) that retain the hinge bracket to the seat back frame.
6. Remove the hinge bracket from the seat back frame.
Installation Procedure
1. Position the hinge bracket to the seat back frame.
Notice: Refer to Fastener Notice.
2. Install the hinge bracket to the seat back frame with 2 bolts (1).
Tighten the seat back hinge bolts to 35 N.m (26 lb ft).
3. Install the latch bracket to the hinge bracket with 2 bolts (2).
Tighten the seat back hinge bolts to 35 N.m (26 lb ft).
4. Install the latch release cables (1) to the latch release mechanism, located at the bottom of the seat back frame.
5. Install the head restraint release cable (2) the left hand hinge bracket.
6. Install the seat back cover and pad.
